Latest Products https://www.myqinstruments.com Latest Products Fri, 13 Dec 2019 21:31:12 +0530 en-us https://www.myqinstruments.com Footwear Testing Equipment https://www.myqinstruments.com/footwear-testing-equipment.htm https://www.myqinstruments.com/footwear-testing-equipment.htm Tue, 02 Jul 2019 00:00:00 +0530 Paper Testing Instruments https://www.myqinstruments.com/paper-testing-instruments.htm https://www.myqinstruments.com/paper-testing-instruments.htm Fri, 12 Jul 2019 00:00:00 +0530 Plastic Testing Equipments https://www.myqinstruments.com/plastic-testing-equipments.htm https://www.myqinstruments.com/plastic-testing-equipments.htm Tue, 02 Jul 2019 00:00:00 +0530 Corrugated Box Bursting Strength Tester https://www.myqinstruments.com/corrugated-box-bursting-strength-tester.htm https://www.myqinstruments.com/corrugated-box-bursting-strength-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q offers highly reliable and standardized corrugated box bursting strength tester for testing the strength of the raw material used for the production of corrugated boxes. The primary use of the instrument is in paper and packaging industries. The amount of bursting strength aids in determining the quality of the material used. The testing is performed to assess the maximum force that a packaging product can tolerate to its maximum. Bursting strength of corrugated boxes is determined using corrugated box bursting strength tester that explains the strength and quality of a material. Most of the corrugated boxes burst due to the force applied to them during transit or storage. The high-quality testing instrument helps to improve the quality of boxes used for packaging. The machine is used to measure the bursting strength of paper or strong paper board.To measure the bursting strength of box, a uniform hydraulic pressure is provided while the box specimen is mounted between two circular clamps and tightened using the geared handle. Application of hydraulic pressure to the left side of the tester causes the diaphragm to expand till the sample ruptured. The result of bursting strength is provided in kg/cm2. Force required rupturing the product is displayed in digital indicator provided. With the accurate result, paper and packaging industries can use the right material and product the high strength boxes.Features Ease of installation, high accuracy, and fine performance. Calibration facility is also available. Single Push Button Operation Highly accurate test results under multidirectional Force Strong Gripping clamp Grooved structure of Test Specimen Holder to avoid slippage and intact holding of specimen under test No slippage in case specimen is tightened uniformly using operating wheel Crease Recovery Tester https://www.myqinstruments.com/crease-recovery-tester.htm https://www.myqinstruments.com/crease-recovery-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Crease is a fold in fabric introduced unintentionally at some stages of processing. Crease or crushing of textile material is a complex effect involving tensile, compressive, flexing and tensional stresses. Crease recovery is a fabric property which indicates the ability of fabric to go back to its original position after creasing.   Theory: Crease recovery is a measure of creases resistance, specified quantitatively in terms of crease recovery angle. To measure this, the popular instrument is Shirley crease recovery tester. The  instrument consists of a circular dial which carries the clamp for holding the specimen. Directly under the centre of the dial there is a knife edge and an index line for measuring the recovery angle. Crease recovery is determined depending upon this recovery angle. If the angle is 0o then recovery is zero and if the angle is 180o then recovery is full. Crease recovery depends on the construction, twist of yarn, pressure, time etc. Usually crease recovery is more in warp way than in weft way. This is because warp yarns are well in quality, strength, treated with sizing, kept in more tension during weaving etc.   Apparatus: Crease recovery tester Scissor Glass plates Steel plates Weight.   Related Standard - Iso 2313, Aatcc 66, Bs En 22313 M&s P22Sample : Cotton woven fabric. Size: 4.4 X 1.5cm.   Atmosphere: Temperature – 25 C and relative humidity – 67%  Standard atmosphere: temperature – 20 C and relative humidity - 65%.   Procedure: The specimen is cut by template and carefully creased by folding in half. The crease is imparted on fabric by placing it between two glass plates and adding to 500gm weight on it. After 1 min the weight is removed and the creased fabric is clamped on the instrument.  Then it is allowed to recover from the crease. The recovery time may vary to suit particular creases. Usually it is 1 min. When crease recovers the dial of the instrument is rotated to keep the free edge of the specimen inline with the knife edge. The recovery angle is read from the engraved scale.  In this way 10 tests are done in warp way and 10 for weft way. The mean value of recovery angle is taken and thus crease recovery is measured. Ring Crush Tester https://www.myqinstruments.com/ring-crush-tester.htm https://www.myqinstruments.com/ring-crush-tester.htm Fri, 05 Jul 2019 00:00:00 +0530  MYQ Crush tester – Digital (ECT) is rugged enough for any production testing environment. It is the ideal testing equipment for paper making, packaging, quality inspection department and more. ECT tester – Digital (ECT) is a useful equipment for determining the probable compression strength of corrugated and solid fiber board boxes by testing the paper and paper-board used in making such boxes.   Ring Crush Tester / Ring Crush Tester / Flat Crush Tester is used for accurate testing of paper, paper-board, solid fiber-board & corrugated board for ECT test and its components. The Ring Crush tester can also be used for performing compression test on all small packages.   The higher ECT value determined by the ECT tester depicts the rigidity of the CFB box. Hence, it may be used to compare the quality of the CFB board. It is also possible to determine the compression strength of the box (CFB) by using ECT tester with McKee’s formula i.e. Compression strength = k. ECT x T x Z Where, K = Constant ECT = Ring crush test value T = Thickness of CFB board (wall thickness) Z = Perimeter of the box i.e. (2 L + 2 W)   Features Simple and accurate read out on a digital display Electronic Force measurement by the Load Key lock prevents accidental or unauthorized resetting. Electro-mechanical Loading System. Sophisticated Electronic Controls for precision and easy operation. Competence with Peak-Hold. Microprocessor based display for accurate test result Separate fixture for ring crush, edge crush and flat crush test. Highly accurate test result under compression force Strong gripping clamps Bright LED display Inbuilt calibration facility Feather touch control Bennewart Flex Tester https://www.myqinstruments.com/bennewart-flex-tester.htm https://www.myqinstruments.com/bennewart-flex-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 MYQ Bennewart Flex Tester To determine the resistance of a component of material to cut growth during repeated flexing, it can also be used to access the effect of surface patterns on crack initiation and growth. The particular test is applicable to out sole of the footwear but may also be used with certain other flexible components.   The test can also be used for understanding effect of surface patterns of crack and substance growth upon repeated flexing. The test is specially preferred for out soles of footwear.   Features -: Equipment made from M.S. Structure duly epoxy or automotive paint. Tester drive with motorized with pully. Equipments base also made from rigid plate finish with automated paint and bright chrome plated.   Related Standard-: DIN 53543-1979 : Testing of rigid polyurethane (PUR) Integral cellular Material for soles and parts of shoes. SATRA PM 161 : Benne warts flex tester Resistance to cut on flexing IS 15298 (part1)-2002 : Safety Protective and Occupational footwear for professional use ISO 17707, ISO 8782 (PART1) : Professional use part1: Requirement and test method -1998 Compression Resistance Tester Cum Nail Penetration Tester https://www.myqinstruments.com/compression-resistance-tester-cum-nail-penetration-tester.htm https://www.myqinstruments.com/compression-resistance-tester-cum-nail-penetration-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Safety / protective footwear should give safety to the toe of the user under compression load and to the sole against nail penetration. Compression resistance is determined by subjecting the footwear to a specified compression load and measuring the clearance with the help of a modeling clay cylinder. Nail penetration resistance is measured by measuring maximum force required for a nail to penetrate through the sole.   Related Standard BS EN 344 1993: Requirements and Test Methods for Safety, Protective. And Occupational Footwear for Professional Use Clause 54: Determination of Compression Resistance Clause 5.6: Determination of Penetration Resistance IS 15298 (Part-1):2002 ISO: 8782-1:1998 DIN Abrasion Tester https://www.myqinstruments.com/din-abrasion-tester.htm https://www.myqinstruments.com/din-abrasion-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 MYQ Din Abrasion Tester is designed to determine abrasion resistance index of natural and synthetic rubber in accordance with the above principle. It consists of test specimen holder with a cylindrical opening adjustable between 15.5 to 16.3 mm to clamp the test specimen with an arrangement to adjust the length of test specimen protruding out. The holder is mounted by a screw mechanism along a length of a rotating drum on which the abrasive cloth is fixed. The movement of the screw mechanism and drum is given by an electric motor, gearbox and chain mechanism to give the specified speed of rotation to the drum and the specified lateral movement to the test specimen holder. The swivel arm and test specimen holder are so disposed that the test specimen is pressed against the drum under the specified load with its center axis at an inclination of 3 degrees to the perpendicular in the direction of rotation and placed above the longitudinal axis of the drum. A rack and pinion arrangement to rotate the test specimen about its axis during the test (whenever desired) is also provided. The abrasive cloth is firmly fixed to the drum using a suitable peel able adhesive with the ends of the abrasive cloth butt jointed together. The equipment is provided with limit switches which, in addition to giving over travel safety to the movement of test holder by preventing the lower edge of the test specimen holder to touch the abrasive cloth. The equipment is built on the rigid steel base and finished in gray metallic and bright chrome/zinc plating to give it a corrosion resistant finish. The molding dies, rotary type cutting dies (hollow drill) for preparing test specimens and extra abrasive cloth are available as optional accessories. Edge Crush Tester https://www.myqinstruments.com/edge-crush-tester.htm https://www.myqinstruments.com/edge-crush-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 MYQ Edge Crush tester – Digital (ECT) is rugged enough for any production testing environment. It is the idealtesting equipment for paper making, packaging, quality inspection department and more. ECT tester – Digital (ECT) is a useful equipment for determining the probable compression strength of corrugated and solid fiber board boxes by testing the paper and paper-board used in making such boxes.   Edge Crush Tester / Ring Crush Tester / Flat Crush Tester is used for accurate testing of paper, paper-board, solid fiber-board & corrugated board for ECT test and its components. The Edge Crush tester can also be used for performing compression test on all small packages.   The higher ECT value determined by the ECT tester depicts the rigidity of the CFB box. Hence, it may be used to compare the quality of the CFB board. It is also possible to determine the compression strength of the box (CFB) by using ECT tester with McKee’s formula i.e .Compression strength = k. ECT x T x Z Where, K= Constant ECT = edge crush test value T=Thickness of CFB board (wall thickness) Z= Perimeter of the box i.e. (2 L + 2 W) Flexo Meter https://www.myqinstruments.com/flexo-meter.htm https://www.myqinstruments.com/flexo-meter.htm Fri, 05 Jul 2019 00:00:00 +0530 The flexometer is the internationally-accepted method for the assessment of the flexing endurance of light leathers and their surface finishes. The tendency for cracks to form in the creases caused by walking can also be determined. The Bally flexer has a different flexing mechanism to the vamp flexer and is complementary to it. It is also used to precondition samples prior to determining water vapour permeability - particularly in assessing uppers for protective footwear. The Ability of light leathers and leather–cloth used in manufacture of shoe uppers. Gloves, and garments to withstand repeated flexing without cracking is determined with the help of a flexing endurance test in this test specimens in shape of rectangular pieces are folded and clamped at each end to maintain them in a folded position in a set of grip s, one of which is fixed while the other is able to oscillate. The movement of the oscillating grip causes the fold in the test specimen to run along its center. This operation is carried out repeatedly and the test specimens inspected periodically to assess the damage produced. The equipment used for this is called as Flex-o-meter.   Core advantages: The twelve stations are conveniently arranged for user access and the mounting of samples. A predetermined counter is fitted to the machine, allowing it to be operated without continuous attendance as the machine stops automatically once the set count is reached.   Relevant Specification IS 5914-1970 : Methods of physical testing of leather , LP19: Flexing endurance IUP/20-1963 : Official methods of international union of leather chemist Society IS 15298 (Part – 1) : 2002 , ISO: 8782 – 1 : 1998 EN ISO 20344:6.6, I.U.P.10+20, I.U.P.20, UNI 4818, DIN 53.351 Dauer-Faltverhalten, UNE/I.U.P.20 Resilience Tester https://www.myqinstruments.com/resilience-tester.htm https://www.myqinstruments.com/resilience-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 MyQ Resilience Tester based on free vertical drop hammer test method to test rubber elasticity. The 28 gram of hammer raised to 400 mm height and to do impact. Average 4rd, 5th and 6th of impact bound height value which can get rubber elasticity. Ross Flex Tester With Cooling Chamber https://www.myqinstruments.com/ross-flex-tester-with-cooling-chamber.htm https://www.myqinstruments.com/ross-flex-tester-with-cooling-chamber.htm Fri, 05 Jul 2019 00:00:00 +0530 The ability of shoe sole with stand repeated bending experienced during walking without developing a crack within the estimated life span of the shoe is a very important factor for determining its quality. Also, its ability to withstand propagation of any slit formed due to a sharp edge pointed object piercing it during walking is equally important in assessing its quality. These abilities of any sole can be evaluated with the help of a Ross Flex Tester.   Cooling Chamber Cooling Chamber Double wall double door inner chamber of SS and outer body of MS duly powder quoted suitable to accommodate the Ross Flex Tester in side the chamber work comfortably on the same. Tem Rang: -20° C Accuracy: +1° C and able to work comfortable on the same . Temp rang : -20° Accuracy : +_ 1° Leather Shoe Flex Tester https://www.myqinstruments.com/leather-shoe-flex-tester.htm https://www.myqinstruments.com/leather-shoe-flex-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 MyQ Shoe Flex Tester is perfect for the determination of full shoe ability to withstand the flexing stresses effects, produced on various parts of the shoe. Also, different parts like soles and uppers of a shoe are tested individually for flexing endurance with the use of Flexometer & Ross flex tester. The shoe flex tester provides results, which are associated to the real performance of the shoe in total.   MYQ Shoe Flex Tester simulates the outcomes of actual walking on the shoe. The specimen of test is held strongly at the toe part using an appropriate toe last and clamp, while the heel part has an individual last on which the shoe is strongly tied as in real use.   Upper-end of the last has an effective system to connect a suitable link mechanism. On a rotating block the mechanism is connected to an eccentric pin so as to provide the link, a to-and-fro movement. Both the length of the link and the eccentricity of the pin in the block are adjustable to offer different angles of deflection of the shoe, with respect to toe's flat portion.   There is a rotating block movement by means of two stage V belt, a motor and pulley arrangement. A digital counter provided with memory backup to record total number of test cycles, and key reset. This standard tester is effectively designed to test one pair of shoes at a time. Also the special models capable of testing two / four / six pairs of shoes are available. Shoelace Eyelet Abrasion Tester https://www.myqinstruments.com/shoelace-eyelet-abrasion-tester.htm https://www.myqinstruments.com/shoelace-eyelet-abrasion-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 MyQ Shoe Lace Eyelets Abrasion Tester is suitable for the abrasion resistance test of all shoelaces and eyelets. The shoelace is bent at a certain angle through the eyelet and repeatedly pulled under the standard load to achieve the purpose of detecting the abrasion resistance of the shoelace and the shoe eye. Six sets of samples can be tested separately at the same time without mutual interference.This machine is suitable for all types of shoelace & eyelet. Taber Abrasion Tester https://www.myqinstruments.com/taber-abrasion-tester.htm https://www.myqinstruments.com/taber-abrasion-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Taber abrasion testing machine used to determine the wear resistance of material and assess its wear resistance degree like –measuring its mass loss and transmittance etc.   It’s applicable on flat products like –suitcase, carpet, cardboard, clothing, glass, plastic contains, metal coating , paint, decorative sheet, high pressure sheet, plastic textile, floor mats, tile, blankets, electronic components, label, leather, automobile interior decoration, resin, furniture etc. Toe Cap Impact Tester https://www.myqinstruments.com/toe-cap-impact-tester.htm https://www.myqinstruments.com/toe-cap-impact-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 The toe portion of shoes used industrial applications or used in mines shall be sufficiently rigid so as not to get pressed down beyond a specified limit when a heavy block falls down on it, thus preventing crushing of or injury to the toe of the user. The toes of miner's safety boots or industrial shoes are generally reinforced with steel toe cap to provide rigidity to them. Whether these toe-caps are sufficient robust so as to fulfill their desired function is ascertained by subjecting the toe-cap assembled in a cut-out shoe to an impact by a falling weight in suitable equipment. The toe-cap shall not press down beyond a specified limit during the impact.   Related Specification EN 344-1993 : Requirements and test methods for safety, Protective and occupational footwear for professional use. IS 15298 (Part I) : 2002 ISO : 8782 – 1 : 1998 Water Vapour Permeability Tester https://www.myqinstruments.com/water-vapour-permeability-tester.htm https://www.myqinstruments.com/water-vapour-permeability-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Water vapour permeability of leather is evaluated by clamping a circular test specimen over the mouth of a bottle containing a solid desiccant and subjecting it to a rapid current of air. The air inside the bottle is circulated in weight if the desiccant in motion. The increase in weight of the bottle over a specified interval of time gives the quantitative measure of the water vapor permeability of the leather sample under test.   Related standard Iup/25 : official method of international union of leather Chemists society Is15298 (part - I) : method of physical testing of leather ISO 8782-1 : 1998 Motorized Button Pull Tester https://www.myqinstruments.com/motorized-button-snap-pull-tester.htm https://www.myqinstruments.com/motorized-button-snap-pull-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 The Assessment of Snap Buttons, Rivetsetc Attachment Strength is an important Criterion especially in the Design and Manufacturer Garments for infants and Children Wear. The measurement of a Uniform Force Applied to the Snap Attachment shall be recorded by means of a force measuring device.   Features :- The assessment of snap buttons, rivets etc attachment strength is an important criterion especially in the design and manufacturer of garments for infants and children wear. The measurement of a uniform forceapplied to the snap attachment shall be recorded by means of a force measuring device.   Package Details :- Main unit - 01 No. Jaw 1for Button Pull Strength (any Button) - 01 No. Jaw 2 for Snap Pull Strength (Male & Female) - 01 No. Jaw 1for Snap Pull Strength (For Male) - 01 No. Accessories Box (Plastic) - 01 No. Mains Lead with plug - 01 No. Detailed User’s Manual - 01 No. Calibration - 01 No. Button Snap Pull Tester https://www.myqinstruments.com/button-snap-pull-tester.htm https://www.myqinstruments.com/button-snap-pull-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 The assessment of snap attachment strength is an important criterion especially in the design and manufacturer of garments of infants' and children wear. The measurement of an uniform force applied to the snap attachment shall be recorded by means of a force-measuring device (in this case a Calibrated Imada Push /Pull Scale is utilized). Once the appropriate force is registered on the Imada Scale, a stop clock is used for recording a set period of time.   To define the garments manufacturer responsibilities and duties to ensure that snaps are applied appropriately to all garments. To prevent separation between the snap and the garment, which represents a dangerous situation If the loose snap is swallowed.   Scope This test method cover an uniform force required to pull a snap attachment perpendicular to the garment The snap attachment is not forced to separate from the garment. This method is required attachment of snaps to specimens using specifications provided by the producers of the snaps. This test method is used to establish correlation to wear conditions and for comparing different brands and types of snap fasteners.   Related Standards ASTM Designation :- D4846 88 ASTM Designation :- D1776ASTM P579.96 Standard Test Method for Resistance to Unsnapping of Stap Fasteners Consumer Products SafetyCommission 38 mm GSM Round Cutter https://www.myqinstruments.com/38-mm-gsm-round-cutter.htm https://www.myqinstruments.com/38-mm-gsm-round-cutter.htm Wed, 24 Jul 2019 00:00:00 +0530 My Q circular cutter use for various textiles laboratory like- Martindale abrasion test, Pilling test & GSM test from smaller test Fabric. Supplied with GSM pad.   Packaging Details Main Unit : 01 No. Special Grade – Cutting Pads: 01 Nos.   Features Economical equipment to determine GSM (Grams per square meter) of any type of fabrics Good grade of aluminum used in main body for light- weight , robustness & resilience . Stainless steel blade holders for lifelong excellent operations. Supplied with rubberized foam cutting pad for smooth cutting & long life of the blades. 113 mm GSM Round Cutter https://www.myqinstruments.com/113-mm-gsm-round-cutter.htm https://www.myqinstruments.com/113-mm-gsm-round-cutter.htm Fri, 05 Jul 2019 00:00:00 +0530 Packaging Details Main Unit :01 No. Special Grade – Cutting Pads: 02 Nos.   Features Economical equipment to determine GSM (Grams per square meter) of any type of fabrics Good grade of aluminum used in main body for light- weight , robustness & resilience . Stainless steel blade holders for lifelong excellent operations. Supplied with rubberized foam cutting pad for smooth cutting & long life of the blades AATCC Standard Launderometer https://www.myqinstruments.com/aatcc-standard-launderometer.htm https://www.myqinstruments.com/aatcc-standard-launderometer.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Laundrometer (AATCC Standard ) is intended to determine Color Fastness of Textile Material irrespective of their composition (Cotton, Linen, Silk, Man-made bers, Wool etc) and their Form (Fibre, Yarn or Fabric) to WASHING. My Q Laundrometer can also be used for checking the Colorfastness against Bleaching and Dry Cleaning.   The body of laundrometer ,both inner & top is made of nest grade Stainless Steel with Digital Control Panel. The specially designed Stainless Steel Rotating Drum in the water bath can accommodate eight Beakers of 1200 ml made of stainless steel to meet the specification for American standards. Two Heaters provided for heating the water bath at faster rate. Ergonomically Designed Digital Control Panel with Time Setting & Temperature Control System. ISO + AATCC standard Launderometer https://www.myqinstruments.com/iso-aatcc-standard-launderometer.htm https://www.myqinstruments.com/iso-aatcc-standard-launderometer.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Laundrometer (ISO + AATCC Standard) is intended to determine Color Fastness of Textile Material irrespective of their composition (Cotton, Linen, Silk, Man-made bers, Wool etc) and their Form (Fiber, Yarn or Fabric) to WASHING. My Q Laundrometer can also be used for checking the Colorfastness against Bleaching and Dry Cleaning.   The body of laundrometer, both inner & top is made of nest grade Stainless Steel with Digital Control Panel. The specially designed Stainless Steel Rotating Drum in the water bath can accommodate four Beakers of 1200 ml& 4 beakers 500ml made of stainless steel to meet the specification for American standards& ISO standards. Two Heaters provided for heating the water bath at faster rate. Ergonomically Designed Digital Control Panel with Time Setting & Temperature Control System.   Releted Standards : AATCC 28, 61, 86, 132 ISO 105 PART CO1-CO6, BS 1006 CO1-CO5 ISO Standard Launderometer https://www.myqinstruments.com/iso-standard-launderometer.htm https://www.myqinstruments.com/iso-standard-launderometer.htm Fri, 05 Jul 2019 00:00:00 +0530 MyQ Laundrometer (ISO Standard) is intended to determine Color Fastness of Textile Material irrespective of their composition (Cotton, Linen, Silk, Man-made bers, Wool etc) and their Form (Fiber, Yarn or Fabric) to WASHING. My Q Laundrometer can also be used for checking the Colorfastness against Bleaching and Dry Cleaning.   The body of laundrometer, both inner & top is made of nest grade Stainless Steel with Digital Control Panel. The specially designed Stainless Steel Rotating Drum in the water bath can accommodate eight Beakers of 500 ml made of stainless steel to meet the specification for American standards. Two Heaters provided for heating the water bath at faster rate. Ergonomically Designed Digital Control Panel with Time Setting & Temperature Control System. Random Tumble Pilling Tester https://www.myqinstruments.com/random-tumble-pilling-tester.htm https://www.myqinstruments.com/random-tumble-pilling-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Random Tumble Pilling Tester, to determine the pilling and fizzing characteristics of textile fabrics. Random Tumble Pilling Tester uses stainless steel impellers that rotate within individually lit aluminum chambers constantly tumbling test fabrics against cork liners for a pre-determined time controlled by a timer and audible alarm.   Compressed air is also injected into the chamber to assist in the tumbling action. With 2 or 4 pilling test chambers. Laboratory standard compressed air supply is required.   Optional order Cork Liner (Pack of 50) Cotton Sliver (pack) Photographic Standards (Set of 5)   Scope This test method covers the determination of resistance to the formation of pills and other related surface changes on textile fabrics. The method utilizes the Random Tumble Pilling Tester. The procedure is generally applicable to all types of woven and knitted apparel fabrics. Note:- For other methods of testing the pilling resistance of textiles, refer to the following ASTM methods: D3511 test for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester Method. D3514 Test for Resistance of Apparel Fabrics to Pilling (Elastomeric Pad Method) For directions covering the measurement of resistance to pilling by the Appearance Retention Tester, refer to Method D 1375 in the 1973 Annual Book of ASTM Standards, Part 24. For direction covering the measurement of resistance to pilling by the Inflated Diaphragm Tester and the Reciprocating Table Tester, Refer to Method D 1375 in the 1966 Annual Book of ASTM Standards, Part 24. Some fabrics that have been treated with a silicone resin cannot be satisfactorily tested by this procedure because the silicone resin appears to rub off on the cork liners in the test chamber and to cause erroneously low results. This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of who everuses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.   Definations Fuzz : untangled fibre ends that protrude from the surface of a yarn of fabric. Pilling resistance : resistance to the formations pills on a textile fabric. Pills : Bunches or balls of tangled fibers that are held to the surface of a fabric by one or more fibers. For definitions of other textile terms used in this method, refer to Terminology D123.   Summary Of Test Method Pilling and other changes in surface appearance, such as fuzzing, that occur in normal wear are simulated on a laboratory testing machine. Fabrics are caused to form typical pills by a random rubbing motion produced by tumbling  specimens in a cylindrical test chamber lined with a mildly abrasive material. In order to form pills that resemble those produced in actual wear in appearance and structure, small amounts of short length cotton fiber (gray in color) are added to each test chamber with the specimens. The degree of fabric pilling is evaluated by comparison of the tested specimens with visual standards that may be actual fabrics or photographs of fabrics or photographs of fabrics,  showing a range of pilingresistance. The observed resistance to pilling is reported on an arbitrary scale ranging from No.5 (no pilling) to No.1 (verysevere pilling).   Uses And Significance The pilling of textile fabrics is very complex property because it is affected by many factors, such as type of fiber of blend, fiber dimensions, yarn and fabric construction, and fabric-finishing treatments. This method of testing fabrics for resistance to pilling is not recommended for acceptance testing of commercial shipment, because the between-laboratory precision is poor. In some cases the purchaser and the supplier may have to test a commercial shipment of one or more specific materials by the best available method, even though the method has not been recommended for acceptance testing of commercial shipments. In such a case, if there is a disagreement arising form differences in values reported by the purchaser and the supplier when using this method or acceptance testing, the statistical bias, if any, between the laboratory of the purchaser and the laboratory of the supplier should be determined with each comparison being based on testing specimens randomly drawn from one sample of material of the type being evaluated. The pilling resistance of a specific fabric in actual wear varies with individual wearers and general conditions of use. As a consequence, it can be expected that garments of the same fabric will show a fairly wide pilling resistance spectrum after wear and much greater variation in wear that in replicate fabric specimens subjected to controlled laboratory tests. This experience should be borne in mind when adopting levels of acceptability for any series of standards. Finishes and fabric surface changes may exert a large effect on pilling. Therefore with some fabrics, it may be desirable to test before as well as after laundering or dry cleaning, or both. Pills observed in worn garments vary appreciably in size and appearance, the latter depending particularly in the presence of lint and degree of color contrast, factors that are not evaluated when pilling is rated solely on the number of pills. The development of pills may be accompanied by other surface phenomena such as loss of cover, color change, or the development of fuzz. Since the overall acceptability of a specific fabric is dependent of both the characteristics of the pills and the other factors affecting surface appearance, it is considered desirable that fabrics tested in the laboratory be evaluated subjectively with regard to their acceptability and not rated solely on the number of pills developed. A series of standards, based on graduated degrees of surface change of the fabric type being tested, may be set up to provide a basis for subjective ratings. The visual standards are most advantageous when the laboratory test specimens correlate closely in appearance with worn garments, that is, show similar ratio of pills to fuzz, etc. Counting the pills and weighting their number with respect to their size and contrast, as a combined measure of pilling resistance is not recommended because of the excessive time required for counting, sizing, and calculation.   Apparatus, Reagents, And Materials Random Tumble Pilling Tester, including air injection device with the following accessories. Cork Cylinder Liners, about 146mm (5¾ in.) wide by 452mm (17 13/16 in.) long cut from 1.5-mm ( 1/16 –in.) thick flat sheets of Type P2117A material conforming to Specification F104. The original surface of the liner produced by slicing the material should be used without any further treatment such as sanding. Vacuum Cleaner, with brush attachment. Rubber Adhesive, No.01-9094. Plastic Bottle, for applying cement. Air Injection Device to give 21-kPa (3-psi) air pressure in each test chamber. Cotton Sliver, 5300 tex (75 grain), fine cotton. Egyptian Karnak, or equivalent. Cotton dyed to gray shade before carding using 0.25% Pontamine Fast Black E (Based on weight of cotton ) or equivalent, at 820 C (1800 F for 60 min rinsed and oven – dried. Methyl Ethyl Ketone, technical, for diluting the rubber adhesive.  Standard pilling Test Fabric, having and established pilling resistance rating for checking machine performance.  Fabric Rating Standards – A series of tested specimen of a specific fabric type which show degrees of pilling orboth, for the fabric to be tested. Store the fabric rating standards and handle them under conditions that will preserve their original form and appearance. Mounting with thick cardboard framing around the specimens is recommended.  Photographic Rating Standards – A set of five photographs 105 mm square numbered 1 to 5 illustrating varyingdegrees of pilling from “very severe pilling” t “no pilling”.  Apparatus for Fabric Evaluation –Facilities for illumination and simultaneous viewing of test specimen and fabricor photograph rating standards. Facilities for Laundering samples. Facilities for Drycleaning samples.   Sampling Take a lot sample as directed in the applicable material specification, or as agreed upon by the purchaser and seller. In the absence of such a specification or other agreement, take a laboratory sample as directed. If sampling from rolls or pieces of woven or warp knits fabric in the lot sample, cut at least one laboratory sample the full width of the fabric and at least 305 mm (1ft) along the selvedge. From circular knit fabrics cut a band at least 305mm wide. If sample from garments, take fabric samples as agreed upon by all interested parties. Elmendorf Tear Strength Tester https://www.myqinstruments.com/tear-strength-tester.htm https://www.myqinstruments.com/tear-strength-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Tearing Strength Tester is a consistent tool useful to determine the tearing strength of fabrics, plastic films, and similar materials. Tearing Strength Tester is the tensile force required to rupture a pre-slit sample under controlled test conditions.   Features -: Sample loads easily and securely into the dual screw clamps The initial tear in the sample is made by pulling the lever attached to the cut blade Pendulum is set securely in place until operator releases it with a push of a finger Comes along with instrument manual & calibration   Standard - BS 4153, 4253, 3424, 4468, ASTM D 1424, DIN 53862, BSEN ISO 13937 M&S P 29 Bursting Strength Tester https://www.myqinstruments.com/bursting-strength-tester.htm https://www.myqinstruments.com/bursting-strength-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 The force required for bursting or complete rupture of the board is measured through a Digital Indicator. The bursting strength defines the materials quality as compared to the others. Digital Bursting Strength Tester provides a hydraulic load under a rubber diaphragm of a specific area of the sample under test. It can be used to accurately determine the bursting strength of paper, corrugated cardboard, carton box, card board, leather cloth or synthetic leathers. value is expressed in terms of kg/cm2. My Q, one of the leading manufacturers of testing instruments offer wide range of paper and packaging instruments. My Q Digital Bursting Strength Tester is utilized for measuring the bursting strength of paper/strong paper- board by submitting it to an increasing uniform hydraulic pressure. The procedure involves preparing the specimen for test and mounting the sample between two circular clamps. The specimen is then, tightened with the help of geared handle provided. The increasing pressure (hydraulic) is then applied by the handle. The diaphragm is expanded till the specimen ruptures. The reading on the digital display is the Bursting strength of the given test specimen in kg/cm2. For more details about bursting strength tester contact us.   Standard Accessories :- 100 MI Glycerin bottle 1 no. Rubber Diaphragm pack of 2 nos. Calibrated Aluminum foil pack of 4 nos. Screw Driver 1 no. Glycerin bowl opening wrench 1 no.   Finish - Powder coated havel Gray & Blue Combination finish and bright chrome / zinc plating for corrosion resistant finish Crimp Tester https://www.myqinstruments.com/crimp-tester.htm https://www.myqinstruments.com/crimp-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 The Crimp in a yarn is defined as the mean difference between the actual length of any yarn and its apparent length in the fabric after weaving. It is usually expressed as a percentage of the apparent length of the yarn in the fabric.   Determination of the crimp of yarn is carried out by marking a known length on the fabric, removing the marked yarn in such a manner that to dose not lose its twist, holding between two grips at the marked points, and slowly extending it till it is subjected to a specified straightening tension. The increase in length of yarn is determined and expressed as a percentage of markedlength to obtain the value of crimp.   My Q Crimp tester is designed to determine the crimp of yarns taken out of fabrics. One end of the yarn is held in a pivoted loading grip on which the desire tension load is applied by means of a sliding weight acting on a lever arm, while the other end is held in a movable grip which is mounted on a screw and can move along the direction of the yarn, stretching it in the process. the distance moved through by this grip gives the extension of the yarn, and can be measured ona scale fixed by the side of the grip assembly.   The loading grip is pivoted on jewel bearing and mounted on a slider platform which can be moved toward or away from the moving grip to enable different marked length of yam to be tested. The test length is indicated on scale fixed on the base of the apparatus against a pointer fixed to the sliding platform.   The yam is held in between the two grips and pulled by moving the movable grip away from the loading grip. The tension under which crimp is to be determined is set on pendulum by moving the sliding weight and is indicated on a load scale. When the yam is under the specified tension, the pendulum lifts off its support, thus breaking a contact and turning off a low voltage indicator light. The elongation of the yarn when the light just goes off is noted, from which the valve of percentage crimp can be calculated.   Relevant Standard - Is 3442-1966 : Method for Determination of Crimp and Count of Yarn Removed from Fabrics Flammability Tester 45 Degree https://www.myqinstruments.com/digital-flammability-tester.htm https://www.myqinstruments.com/digital-flammability-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 45 Degree Flammability Tester, to determine fabric flammability (fabric burning test) under controlled conditions. Automatic igniter is equipped to ensure the 45 degree fabric flammability tester safe and easy to operate.   Stainless steel test cabinet with glass observation panel provides with automatic timing of flame spread in 0.1-second increments from ignition. Brushing Device is included.   Original Accessories 1 Brushing device 1 No. 50 sewing thread 5 sets of sample holder ICI Pilling Tester https://www.myqinstruments.com/digital-ici-pilling-tester.htm https://www.myqinstruments.com/digital-ici-pilling-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Pilling is a fabric surface phenomenon characterized by little balls formed by entangled fibers clinging to the surface. These are formed during wearing or washing by the entanglement of the loose fibers, which protrude from the fabric surface, and development of these into spherical bundles anchored to fabric by few unbroken fibers. Ramp pilling tester Helps to accurately replicate pilling on fabrics   Package Details: Main unit : 01No. Specimen mounting Jig : 01No. Specimen Insertion Tool : 01No. Standard pilling Tubes : 08Nos. Fine Cutting Scissor : 01No. Pilling Specimen Template : 01No. Marking Pen : 01No. Mains Lead with Plug :01No. This User’s Manual :01No. Calibration Certificate :01No. Digital Tear Strength Tester https://www.myqinstruments.com/digital-tear-strength-tester.htm https://www.myqinstruments.com/digital-tear-strength-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Digital Tearing Strength Tester is a consistent tool useful to determine the tearing strength of fabrics, plastic films, and similar materials. Tearing Strength Tester is the tensile force required to rupture a pre-slit sample under controlled test conditions. Digital Elmendorf Type Tester determines the tearing strength by measuring the work done in tearing through a fixed length of the test specimen. It consists of a sector pendulum pivoted on anti-friction ball bearings on a vertical bracket fixed on a rigid metallic base. Feature of Tearing Strength Tester The equipment effectively measures the tearing strength.   It is user- friendly. It consists of anti-friction ball bearings. A set of calibrated check weights are also supplied   Features -: Sample loads easily and securely into the dual screw clamps. Results shown on both Digital LED Display & pendulum The initial tear in the sample is made by pulling the lever attached to the cut blade Pendulum is set securely in place until operator releases it with a push of a finger Comes along with instrument manual & calibration   Acessories : Main Unit : 1 No Augmenting Weight (1600gm) : 1 No Augmenting Weight (3200gm) : 1 No Augmenting Weight (6400gm) : 1 No Template For Speciment : 1 No Cutting Blade : 2 No User Manual : 1 No Calibration Certificate : 1 No   Capacity : 1600 Gms (By Brass Pendulum only) 3200 Gms (By adding Augmenting eights) 6400 Gms (By adding Augmenting eights ) Tensile Strength Tester https://www.myqinstruments.com/digital-tensile-strength-tester.htm https://www.myqinstruments.com/digital-tensile-strength-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 MyQ new Digital Tensile strength tester is helpful to identify tensile strength & elongation of fabrics. In the industrial textile industry, tensile strength typically refers to the strength and elongation properties of the material. Textiles can be tested in many forms, including single strands, yarns, webbing, woven, braided materials and non-woven fabrics.   Most textile fabric tensile testing is performed as either a grab test, to eliminate edge effects, or a strip test, including edge effects. For a grab test, the grips of a testing machine clamp a fabric sample in the center using jaws smaller than the sample width. For a strip test, the grips clamp a strip of fabric using jaws wider than the sample width.   Key Features New updated model with imported motor. Unit changing facility (LOAD)- N,Kn,KG,LBS Unit changing facility (Elongation)- mm,inch,Cm Control – Up, Down, Stop Manual & Computer Both   Test Facility Tensile with elongation test Seam slippage test Twist Tester https://www.myqinstruments.com/digital-twist-tester.htm https://www.myqinstruments.com/digital-twist-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Micro Controller Based Digital Twist Tester , has been designed specially to measure the TPM (Twist per meter) or TPI (Twist per inch) of the twisted yarn. This model is a motor driven fully automatic instrument with auto stop facility for motor with built in sensor.   The instrument has facility of both untwist or untwist/twist method for measurement of TPM of twisted yarn. 16 –character LCD display unit gives TPM/TPI values with S or Z type of twist.   Specifications Yarn Test Length : 50 mm to 500 mm adjustable (metric unit) or 2” to 200” adjustable (imperial unit.) test length adjustment is by slider mechanism &feeding set length on the display using keyboard. : the test length is automatically taken into account for calculation and final reading is display directly in TPM/TPI. Suitable for S/Z type of twisted yarns. Range : up to 9999 TPM or 99.99 TPI. Resolution : 1 TPM or 0.01 TPI. Elongation Range : +110mm or 4 Inch. with tolerance of -15 mm or 0.6 Inch for movement in other direction. Motor Speed : Up to 1500 RPM. Manual control of rotation is possible by hand. Supply : 230 V AC, 30 Watts. Size : 1000 mm x 150mm x 200mm (approx). GSM Smart Cutter https://www.myqinstruments.com/gsm-smart-cutter.htm https://www.myqinstruments.com/gsm-smart-cutter.htm Fri, 05 Jul 2019 00:00:00 +0530 MYQ GSM SMART cutter is a single solid machine with 3 metal cutting wheels perfectly synchronized to get precise 100cms cut. It holds complete grip on fabric with minimum efforts with a smooth rotation the GSM sample will be apart. It has longlasting hardened metal wheels gives you long & smooth cutting life.   Accessories Main unit Instrument manual Calibration certificate. Handy Metal Detector https://www.myqinstruments.com/handy-metal-detector.htm https://www.myqinstruments.com/handy-metal-detector.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q handy metal detector is useful to detect exact position of broken needle or any ferrous particle in garments. Highly accurate, hand held model for spot detecting.   Sensitivity - 1.2 mm Hot Air Oven https://www.myqinstruments.com/hot-air-oven.htm https://www.myqinstruments.com/hot-air-oven.htm Wed, 24 Jul 2019 00:00:00 +0530 My Q HOT AIR OVEN Determination of effect of ageing on various physical properties of different materials may be carried out, by heating the material under test ,inside the oven as temperature required so that the effects of long –term ageing are reproduced within a much shorter duration of time.   My Q Hot Air Oven is double walled constructed, its outer body made up of mild steel duly powder coated & inner chamber made up of stainless steel. The control panel is on the top having digital temp. Controller cum indicator. Miniature circuit breaker is provided on the top panel of safety. Thermostat is provided to control the inflow of current to heaters for uniform heating circulating fan is fitted in the chamber for uniformity of temperature inside the chamber, stainless steel shelves are provided for the sample. Laboratory Incubator https://www.myqinstruments.com/laboratory-incubator.htm https://www.myqinstruments.com/laboratory-incubator.htm Fri, 05 Jul 2019 00:00:00 +0530 Determination of effect of ageing on various physical properties of different material may be carried out by heating the material under test ,inside the incubator as temperature required so that the effect of long term ageing are reproduce with in a much shorter duration of time.   My Q Incubator is double walled constructed incubator with outer body made up of mild steel duly powder coated and inner chamber made up of stainless steel.   Control panel is on the top having digital temp./humidity controller cum indicator miniature circuit breaker is on the top panel for safety .   Thermostat is provided to control the inflow of current to heater for uniform heating insulated glass window is provided to view the samples without opening the doors. Circulating fan is fitted in the chamber for uniformity of temperature inside the chamber.   Stainless steel shelves are provided for sample holding. Labtronics PH Meter https://www.myqinstruments.com/labtronics-ph-meter.htm https://www.myqinstruments.com/labtronics-ph-meter.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q PH Meter offers high performance at an economical cost. Integrating signature My Q user friendly interface such as splash-proof keyboard & custom dual display LCD, this economy range of bench meters is ideal for routine use in the laboratories, production plants & students experiments in school , collage & universities .   Features: Large backlit LCD display shows mode indicators & help messages. Up to 3 points push –buttons calibration with auto-buffer recognition. Selectable ph buffer standards and temperature units. Automatically calculates and display electrode slope after calibration. Automatic temperature compensation (ATC) ensures highly accurate measurements over the entire range. Automatic endpoint function freezes the stable measured values. Help massage as a operational guide to help you understand how to use meter. Setup menu lets user customizes buffer standard ,calibration points ,temperature units automatic or manual hold function ,auto-off feature to meet personal preferences. Reset function can resume all setting to factory default values.   Applications – Water and west water treatment Research and education Environmental and agricultural monitoring Drinking water and cosmetics Other industrial applications   Standard accessories – Ph electrode Liquid calibration ph buffer bottle (4.01,700, 10.01 Ph) Temperature probe Electrode stand 9V power adopter Instruction manual Calibration certificate. Martindale Abrasion Tester https://www.myqinstruments.com/martindale-abrasion-cum-pilling-tester.htm https://www.myqinstruments.com/martindale-abrasion-cum-pilling-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Motorised Crockmeter https://www.myqinstruments.com/motorised-crockmeter.htm https://www.myqinstruments.com/motorised-crockmeter.htm Wed, 24 Jul 2019 00:00:00 +0530 My Q Colour fastness to rubbing is the most basic ofcolour fastness tests,Crockmeter is used to determine colourfastness to wet and dry rubbing. Specimens are rubbed with dry, standard cotton cloth (Crocking cloth) and again, if applicable, with wet cloth. The staining of the crocking cloth is assessed with an AATCC or SDC Grey Scale.   Equipment Digital motorized crock meter is used for determination of color fastness of dyed& printed textile to dry & wet rubbing. This equipment consist of a counter ,a flat peg. This equipment is designed with 16mm diameter finger & length of traverse 100(±5)mm. The display comes digitally on the panel. The test specimen is held firmlyover standard abrasive paper (Emery paper) with the help of specimen holder. The equipment is built on a mild steel base to give the stability and rigidity.   Salient Features Diameter of the rubbing finger :16mm Load on the finger :9 N Size of crocking cloth :5x5 CM Counter (Re-settable): 3 Digit counter Specially designed acrylic clamp to mount the test garments. Supplied with all accessories. Length of the traverse of the finger: 104± 3mm   Accessories : Main Unit : 01 No. Finger (f16mm fitted in the unit) : 01 No. Spring Clips (for finger f16 mm) : 02 Nos. Crocking Clothes (Pack of 100) : 02 Packets Blotting paper : 01 Packets Specimen Holder (Acrylic) : 01 No. Mains Lead with plug : 01 No. The User manual : 01 No.   Related Standards - ISO 105 x 12/D02 , AATCC 8 / 166, BS 1006 D02 Rotary Crockmeter https://www.myqinstruments.com/motorized-rotary-crockmete.htm https://www.myqinstruments.com/motorized-rotary-crockmete.htm Wed, 24 Jul 2019 00:00:00 +0530 My Q Rotary Crock meter (Motorized), is helpful to determine color fastness of textiles todry or wet rubbing particularly for printed fabrics. This rotary crock meter applies 11.1 N load with 16mm finger and rotate clockwise then anti-clockwise.   Standard Accessories: Main Unit : 1 No Rubbing cloth pack : 2 Pack Emery paper : 1 No Finger clip : 2 No User manual : 1 No Calibration certificate : 1 No ( Also available in Hand Operated Model) Needle Detector Machine https://www.myqinstruments.com/needle-detector-machine.htm https://www.myqinstruments.com/needle-detector-machine.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q is one of the reputed manufacturers, suppliers, and traders of Home Furnishing Needle Detector.  Massively used for garment, shoes, home furnishing Items and toys, these efficient machines come with  user-friendly operating system. In the proffered series, magnetic induction method is used for detection.   Features: Portable Rugged in construction Easy to maintain Table Top Swatch Cutter https://www.myqinstruments.com/table-top-swatch-cutter.htm https://www.myqinstruments.com/table-top-swatch-cutter.htm Fri, 05 Jul 2019 00:00:00 +0530 Swatch cutter 300 mm is accurate& convenient equipmentFor preparing swatches with pinking edges in multiple layers To a depth of 25 mm.   Features - Sample up to 300mm width & any length can be cut. Depth of the sample up to 25 mm can easily be cut. Pinking blade tip gives excellent look of swatches prepared New updated table top model. Metal body. Sample cutting plate(with marking line) Cutting blade (imported ) User friendly handle. Wrap Reel https://www.myqinstruments.com/wrap-reel.htm https://www.myqinstruments.com/wrap-reel.htm Fri, 05 Jul 2019 00:00:00 +0530 Wrap Reel, to produce skeins of yarn of a predetermined length and number of turns for count and strength testing. Yarn Length Measuring Device complies with ISO 2060, ASTM D1907/2260, BS 2010, etc. Wrap reel yarn testing will be more accurate if you use our Wrap Reel. GSM Round Cutter https://www.myqinstruments.com/gsm-round-cutterll-tester.htm https://www.myqinstruments.com/gsm-round-cutterll-tester.htm Fri, 21 Jun 2019 00:00:00 +0530 Swatch Machine https://www.myqinstruments.com/swatch-machine.htm https://www.myqinstruments.com/swatch-machine.htm Tue, 02 Jul 2019 00:00:00 +0530 Fabric Testing Instruments https://www.myqinstruments.com/fabric-testing-instruments.htm https://www.myqinstruments.com/fabric-testing-instruments.htm Fri, 12 Jul 2019 00:00:00 +0530 Yarn Testing Instruments https://www.myqinstruments.com/yarn-testing-instruments.htm https://www.myqinstruments.com/yarn-testing-instruments.htm Tue, 02 Jul 2019 00:00:00 +0530 Needle Metal Detector https://www.myqinstruments.com/needle-metal-detector.htm https://www.myqinstruments.com/needle-metal-detector.htm Tue, 02 Jul 2019 00:00:00 +0530 Handy Moisture Meter https://www.myqinstruments.com/handy-moisture-meter.htm https://www.myqinstruments.com/handy-moisture-meter.htm Fri, 05 Jul 2019 00:00:00 +0530 The definitive general purpose molsture meter for builcllng surveying, timber inspection and a very broad range oi other applitions. The Mini moisture meter series has been the choice for theusands of users across the world for more than 30 years. The enduring popularity and success oi these instruments is attributable to their versetilly, simple design. robust on-nslructinn and ease of use.Typical users include: Wood product manufacturers and lraders Carpet manufacturer Cormgated box manufaciurer Jute bags manuiaclurer Packing industlies Mini & Digital Mini Protimeter Moisture MetersThe definitive gemerai purpose moisture meters for building surveying, timber inspeciton and very broad range of other applications such as corrugated boxes and carpet etc. Color Matching Cabinet https://www.myqinstruments.com/color-matching-cabinet.htm https://www.myqinstruments.com/color-matching-cabinet.htm Wed, 24 Jul 2019 00:00:00 +0530 Colour Matching Cabinet is used for Colour Matching under different light sources the equipment is fitted with five Light Sources as per Intemational Standards.Supplied with D-65 - Artificial Daylight - 2 No's TFL LIGHT - Tungsten Filament - 4 No's (SHOWROOM LIGHT) TL-84 Light - Point of Sale - 1 No's UVB LIGHT - ULTRA VIOLET - 1 No CWF Light - Cool White Florescent - 1 No's 45 Degree Angle - l No. Hour Meter - 1 No. Dimensions - 28” x 18.5” x 23” Warranty one year Calibration Certificate Instruction Manual Related Standards ISO-3664 / BS-950 / DIN-6713 ASTN-Z-8723 Swatch Cutter https://www.myqinstruments.com/swatch-cutter.htm https://www.myqinstruments.com/swatch-cutter.htm Swatch Machine Mon, 06 May 2019 00:00:00 +0530 Hand pH Meter https://www.myqinstruments.com/hand-ph-meter.htm https://www.myqinstruments.com/hand-ph-meter.htm Fri, 05 Jul 2019 00:00:00 +0530 Waterproof  PH METER is great for outdoor applications such as taking pH measurements in lakes and streams. Designed to float in water, you can even attach a line to the housing for easy retrieval. The PH METER has a replaceable sensor for easy maintenance. Double-junction electrode sensor handles wastewater and solutions containing sulfides, heavy metals, and TRIS. Electrode sensor offers a clog-resistant  junction and a recessed, glass pH bulb to protect against breakage. Zipper Fatigue Tester https://www.myqinstruments.com/zipper-fatigue-tester.htm https://www.myqinstruments.com/zipper-fatigue-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Application Zipper Reciprocation Tester, to determine the resistance to reciprocation of zipper (slide fastener). The test specimen is subject to a specified number of cyclic operations whilst under lateral and longitudinal tension. Zipper Tester catches the head of zipper to do reciprocating movement in a constant speed for 30 times per minute. Integral counter is set to stop the drive when a pre-selected count has been reached. Equipped with a sensor so that the machine will stop automatically before the zipper is broke. Adjustable stoke 40~100mm is offered as request. What is a Zipper Reciprocation Tester The zipper reciprocation tester is used to test that whether the zipper can withstand reciprocating pulling operation with a specified number of times when the zipper is reciprocating under transverse and longitudinal tension in the instrument. During the test, the tester drives the zipper at a constant speed and moves 30 times per minute until the specified number of times is completed. Slider fastener reciprocating tester mainly detects the limit value of zipper endurance and makes a reasonable evaluation of zipper performance. Test Project Test of flat tensile strength: flat tensile strength is the most basic strength index used to test the ability of teeth chain to resist transverse force in an occlusal state, which is very similar to the state of actual use. Test of the tensile strength of the top stop: interlock the teeth chain of zipper, and pull the slider to the top stop, this can measure the strength of the top stop, which simulates the ability to resist external forces when pulling the slider over the top stop or moving the top stop from the rib with the zipper in a grip state. Test of the tensile strength of the bottom stop: Pull the slider to the bottom stop, the strength of the bottom stop and the resistance of the internal components of the slider can be measured by pulling the teeth chain on left and right. Test of the horizontal tension at the zipper’s bottom, that is, the tensile strength of the opening part of the zipper’s lower end. Test of the locking strength of the slider: the locking strength and the resistance of the internal components of the slider through stretching the left and right zippers when the buckle is locked in the middle of the zipper. Test of the comprehensive strength of the slider: Apply a force to the slider in the direction perpendicular to the slider body, get the comprehensive strength of the slider when slider body is separated from the slider. Operation Method of Slider Fastener Endurance Tester Start the power switch and adjust the knob so that the drawing clamping device is in the lowest position (easy to grip the sample). Turn off the power switch, select a positioning piece with an appropriate thickness, which fixed to the slider of the zipper, fix the zipper head on the sheet and lock it. First, fix the bottom stop of the zipper to the upper chuck roughly(the center line of the chuck is perpendicular to the center of the zipper), and then fix the top stop of the zipper to the two longitudinal chucks. Loosen the upper chuck slightly, pull up the tail end of the zipper so that the longitudinal clamping device is parallel, and then lock the upper chuck(at this point, the two longitudinal chucks are at the same horizontal level by visual inspection). Loosen the two transverse chucks and let the tapes on both sides of the zipper into the two clamps and clamp it. Adjust the tension of spring scales on the longitudinal and transverse according to the standard. Set the number of tests, start testing, after a certain number of times, take off the sample, observe and record the damage degree of the sample. Wrinkle Recovery Tester https://www.myqinstruments.com/wrinkle-recovery-tester.htm https://www.myqinstruments.com/wrinkle-recovery-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Application AATCC Wrinkle Recovery Tester is used for determining a fabric’s ability to recover after wrinkling under a pre-determined load for a set period of time. A set of 5″x3″ dimensional plastic replicas is offered on request to grade the test samples 1 ~ 5. Optional order AATCC Wrinkle Recovery Tester Plastic Replicas (Set of 5) Weight - 5 kgDimensions Length : 150 mm Width : 150 mm Height : 330 mm Standards AATCC 128 ISO 9867 ENKA 3061 Why Do We Need to Test the Wrinkle Recovery of the Fabrics?In the process of wearing and keeping the fabric, because of the external forces, such as folding, shearing, compression, bending and washing, it is difficult to return to the original level state even after removing the external force. This phenomenon is called wrinkle. Wrinkle not only seriously affects the appearance of fabric, but also leads to severe wear along the crease or wrinkle direction, which accelerates the damage of fabric. Therefore, crease recovery is one of the important indexes to evaluate the fabric’s properties.Test PrincipleFabric wrinkle recovery instrument is used to test the recovery ability of fiber fabric samples under a certain load after bending for a certain time. Under the condition of standard atmospheric pressure, apply a predetermine pressure to the sample with the standard wrinkle device and keep the time set. The pressurized sample will produce uniform deformation through the whole structure of the instrument and the precise spiral column. Then the sample is compared with the standard sample and rated.Sample Preparation Cut three samples, 150mm * 280mm each. These should be cut with the long direction running in the warp or the wale direction of the fabric. At 21±1℃ and 65±2% humidity, each sample remained at least 8 hours in the state. Testing Procedure All tests were performed at the environment of 21±1℃ and 65±2% humidity. Raise the top flange of the recovery tester and fix it to the top of the tester with the lock pin. Wrap one long edge of a pre-conditioned test specimen around the top flange of the wrinkle tester, with the face of the specimen on the outside. Fasten the specimen in position using one of the strips of Velcro. Wrap the other end of the specimen on the flange, and then wrap the second piece of Velcro around the bottom of the specimen so that it forms a “closed tube” of fabric. Adjust the bottom edge of the specimen so that it lies smoothly without sagging between the top and bottom flanges. Withdraw the locking pin and lower the top flange gently with one hand until it comes to rest. Immediately place a total mass of 3500 grams (all three weights) on the top flange and record the time. After 20 minutes, remove the three weights and raise the top flange, carefully avoiding altering any of the induced wrinklings. Clamp the short edge side of the sample with a clip and hang the sample on a hanger, so that the length direction of the sample is perpendicular to the ground. After 24 hours in this conditioned atmosphere, take down the sample and rate it. Yarn Evenness Tester https://www.myqinstruments.com/yarn-evenness-tester.htm https://www.myqinstruments.com/yarn-evenness-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 The MYQ Yarn Evenness Tester yarn warp arrangement to wrap the yarn over it at equal spacing under a desired tension. The board is rotated manual to warp yarn over it. The yarn is guided on to the board through a yarn guide, which moves parallel to the pivoting axis of the board with the help of a screw giving uniformly spaced wraps. The guide is positively linked to the rotation of the beard with the help of a chain and sprocket drive. A set of change gears gives five different spacing for wrapping yarn of different counts. A spring loaded adjustable tensioning arrangement provides the desired tension to the yarn.The equipment is built on a rigid base. It is finished in shore blue metallic painting and bright chrome/ zinc plating to give it s corrosion resistant finish. Two rectangular acrylic boards having one face white and the other face black to enable evaluation of both light and dark colored yarns are supplied as standard accessory, Additional boards, both rectangular and tapered, are available as optional accessoriesRelated StandardASTM D 2255-1964 : Standard Method for grading of cotton yarns for appearance Humidity Chamber https://www.myqinstruments.com/humidity-chamber.htm https://www.myqinstruments.com/humidity-chamber.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q HUMIDITY CHAMBER maintains testing samples at a particular temperature and humidity level. The environmental conditions play a crucialrole in affecting both the physical and chemical properties of materials and the humidity chambercan conveniently replicate such environmental conditions for testing purposes. HUMIDITY CHAMBER is used for textile fabric materials afterprocess completion; the main task of this chamberis to remove the moisture level in the sample. Withthe help of an efficient humidity chamber, the manufactures can easily ensure the best quality ofproducts delivered to their clients.Features -: Specially designed to condition samples before & after testing. Ambient conditioning condition, temperature 22±2°C & humidity 65± 2 % cam easily attended. Latest water shower technology adopted for maintaining humidity. Digital temp. Controller & indicator with imported sensor. High RPM German fan for circulating air inside the chamber. Digital humidity indicator cum controller with imported sensor. Digital timer of 999 hours with memory backup CFT free compressor for cooling. Accessories : Main Unit :  1 No S.S Trey :   2 No User Manual :   1 No Calibration Certificate : 1 No Net Weight Of Unit  : 130 Kg Related Standards : Astm D1776-04 Drop Tester https://www.myqinstruments.com/drop-tester.htm https://www.myqinstruments.com/drop-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 MYQ  Drop Tester is designed as per IS: 7028, Part IV standard. It is a useful instrument to determine the transport value of solid fibre boxes, corrugated boxes and shipping containers. It has an angular drop arrangement to correctly determine the transport worthiness of the package from all angles. The drop test is performed to measure the ability of corrugated boxes and fibreboard cartons and containers to stand with vertical impact in free drops. The test is performed one time and more than one time to analyse various conditions that occur on a package during transit and handling. It serves as the best equipment for performance analysis and package design before production and use. Specification Height of the laboratory equipment is 1.8 meter (Adjustable). Higher height models are also available. Load can be exerted up to 50Kg. Maximum and Minimum height of drop is 1800 mm and 750 mm respectively. Sample Mounting table –465 * 445 mm Adjustable angle holder is provided with the device. Type of tests: Straight Drop Angular Drop Safety: Locking pin Features It is highly consistent equipment for findings repeatable and accurate results. The testing instrument is supplied with conformance certificate. Provision to uplift test platform by guide mechanism Drop Height adjustable clamp Straight and Angular Drop tests can be performed on a single Instrument Strong base plate with rugged structure Optional Features : Pneumatic model and in various platform sizes also available as per requirement.Standards : IS: 7028 Part IV Dart Impact Tester https://www.myqinstruments.com/dart-impact-tester.htm https://www.myqinstruments.com/dart-impact-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Myq Falling Dart Impact Tester is designed to measure impact resistance property of plastic films, sheeting, paper and foils. It is based on free falling dart method and equipped wtih LCD display.Properties - Impact Applications - Plastic Films, Paper and paperboard, foilsMethod - Free Falling Dart MethodStandards - ASTM D1709, ISO 7765-1-1988, JIS K7124-1, GB/T 9639.1-2008Features Two methods (A&B) in one instrument Windows menu interface and touch screen Pneumatic specimen clamping Graphic display of testing process Pedal switch Built-in observation light RS232 micro printer Intelligent data sharing system Muffle Furnaces https://www.myqinstruments.com/muffle-furnaces.htm https://www.myqinstruments.com/muffle-furnaces.htm Fri, 05 Jul 2019 00:00:00 +0530 A Muffle furnace in historical usage is a furnace in which the subject material is isolated from the fuel and all of the products of combustion, including gases and flying ash. After the development of high temperature electric heating elements and widespread electrification in developed countries, new muffle furnaces quickly moved to electric designs. Muffle Furnace Rectangular horizontal, powder coated Complete with indicator lamps Installed with Digital Temperature Controller Laboratory Dyeing Machine https://www.myqinstruments.com/laboratory-dyeing-machine.htm https://www.myqinstruments.com/laboratory-dyeing-machine.htm Tue, 02 Jul 2019 00:00:00 +0530 HTHP Beaker Dyeing Machine https://www.myqinstruments.com/hthp-beaker-dyeing-machine.htm https://www.myqinstruments.com/hthp-beaker-dyeing-machine.htm Fri, 05 Jul 2019 00:00:00 +0530 HTHP Beaker Dyeing Machine is ideally suitable for sample dyeing of fabric and yarn at high temperature and pressure. This machine is a versatile, compact and maintenance free apparatus suitable for both Polyester and cotton sample dyeing. In fact it is suitable for dyeing of any fiber in form. The apparatus is of immense use for dyeing and processing units, research/testing labs, and dyes manufacturers.Specification Model :- 12 x 1000ml size Outer M.S duly powder coated, inner S.S with insulation Heating Load – 3 x 2.0 KW Maximum rate of rise – 1.5 C/min Drive – 2HP (25 or 32)rpm geared Motor coupled with rotor shaft Forward / Reverse movement of rotor thru programmer. Beaker / rotor made from S.S 316. Frame, tank and top made from S.S 304 With Microprocessor based temperature Programmer Cooling – through cold water inlet in copper coil Power – 440v, 3 Phase, Neutral, 50 Hz Specifications of HTHP Beaker Dyeing Machine: Standard Model : 12x250 ml., 12x100 ml., 6x500 ml., 12x500 ml. Electric Supply : Single phase 220 Volts, AC Supply Heater Supply : 3000 watt Single Phase Overall dimensions of the Unit : 700 ±05mm (L) x 470±05mm (H) x 370±05mm (W) Capacity of Beaker : 250 ml Beaker X 12 Pcs. Carriage Rotation : At 22 rpm. (±2 rpm) Maximum operating Temperature : 135°C. No. of Heater : 3 x 1500 W Maximum rate of heating: 1.50C Maximum rate of cooling 1.50C ( Water temperature max 250C ) Net Weight of the Unit : 35 Kg. Net Weight of the Beaker (250ml) : 10.980 Kg. Motor : Reversible Synchronous Geared Motor Medium used for Heating : Glycerine Beakers : 12x250 ml., SS-316 grade Melt Flow Indexer https://www.myqinstruments.com/melt-flow-indexer.htm https://www.myqinstruments.com/melt-flow-indexer.htm Fri, 05 Jul 2019 00:00:00 +0530 MYQ  Melt Flow Indexer, often abbreviated as "MFI", is an affordable-price tabletop instrument used to test the melt flow resistance (MFR) of a wide range of thermo-plastic materials. The tester conforms to all National and International melt flow resistance standards, including BS EN ISO 1133 and ASTM D1238. Any temperature within 120°C-450°C (248°F-842°F) can be accurately controlled.Included weights 1 600g 1 875g 1 960g 1 1000g 1 1200g 1 1640g 8 2000g Features Built-in microprocessor maintains temperature control to within ±0.2ºC (±0.4ºF), with rapid ramp-up to set point. Temperature fluctuation is ±1% of set temperature. Extruded material automatically cut-off by built-in scraper mechanism at preset intervals, controllable to ±0.01 seconds. Clear multi-line LCD display and tactile-feedback membrane keypad allow fast, accurate input of test parameters and provide continuous display of settings during testing. AccessoriesThe Melt Flow Indexer is supplied with all the accessories and weights necessary for maintenance and operation. Nothing else to buy! 2 Piston Rods 2 Tungsten Carbide Dies 3 Replacement Cut-Off Knives 1 Cleaning Tool 1 Charging Tool Die Ejector 1 Level Meter 1 Guide Bushing 1 Filling Funnel 2 Cylinders 1 Die Cleaning Tool Magnetic Stirrer https://www.myqinstruments.com/magnetic-stirrer.htm https://www.myqinstruments.com/magnetic-stirrer.htm Fri, 05 Jul 2019 00:00:00 +0530 The MYQ MAGNETIC STIRRER is specially designed for textile Laboratories to heat liquids continuously at high temperature. MS Conditioning Chamber https://www.myqinstruments.com/ms-conditioning-chamber.htm https://www.myqinstruments.com/ms-conditioning-chamber.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Conditioning chamber maintains testingsamples at a particular temperature and humiditylevel. The environmental conditions play a crucialrole in affecting both the physical and chemicalproperties of materials and the humidity chambercan conveniently replicate such environmentalconditions for testing purposes. Conditioning Chamber is used for textile fabric materials afterprocess completion; the main task of this chamberis to remove the moisture level in the sample. Withthe help of an efficient humidity chamber, themanufactures can easily ensure the best quality ofproducts delivered to their clients.   Features -: Specially designed to condition samples before & after testing. Ambient conditioning condition, temperature 22±2°C & humidity 65±3% cam easily attended. Latest water shower technology adopted for maintaining humidity. Digital temp. Controller & indicator with sensor. High RPM German fan for circulating air inside the chamber. Digital humidity indicator cum controller with imported sensor. Digital timer of 999 hours with memory backup CFT free compressor for cooling.   Accessories : Main Unit : 1 No S.S Trey : 2 No User Manual : 1 No Calibration Certificate : 1 No Net Weight Of Unit : 130 Kg Related Standards : Astm D1776-04 SS Conditioning Chamber https://www.myqinstruments.com/ss-conditioning-chamber.htm https://www.myqinstruments.com/ss-conditioning-chamber.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Conditioning chamber maintains testing samples at a particular temperature and humidity level. The environmental conditions play a crucialrole in affecting both the physical and chemical properties of materials and the humidity chambercan conveniently replicate such environmental conditions for testing purposes. Conditioning Chamber is used for textile fabric materials afterprocess completion; the main task of this chamberis to remove the moisture level in the sample. Withthe help of an efficient humidity chamber, the manufactures can easily ensure the best quality ofproducts delivered to their clients.   Features -: Specially designed to condition samples before & after testing. Ambient conditioning condition, temperature 22±2°C & humidity 65± 2 % cam easily attended. Latest water shower technology adopted for maintaining humidity. Digital temp. Controller & indicator with imported sensor. High RPM German fan for circulating air inside the chamber. Digital humidity indicator cum controller with imported sensor. Digital timer of 999 hours with memory backup CFT free compressor for cooling.   Accessories : Main Unit : 1 No S.S Trey : 2 No User Manual : 1 No Calibration Certificate : 1 No Net Weight Of Unit : 130 Kg Related Standards : ASTM D1776-04 Projection Microscope https://www.myqinstruments.com/projection-microscope.htm https://www.myqinstruments.com/projection-microscope.htm Fri, 05 Jul 2019 00:00:00 +0530  Details Siedentopf observation head inclined at 30 degree rotatable at 360 Diopter adjustment ring on ocular tube. Interpupillary distance from 55mm to 75mm Eyepiece EWF 10x fov 18MM Objectives E plans achromatic 4X, 10X, 40X, 100 oil Mechanical body – co-axial focusing system. Pre-focusing lever & tension adjustment ring. The slow motion has 1Div = 0.002 mm Reverse angle quadruple nosepiece revolves on ball bearing Mechanical stage size 125mm x 135mm having low positioned co-axial control on ball bearing Built in base illumination system with 6V /20w halogen bulb and power supply Cross movement 55mm x 74mm Stage condenser-abbe condenser N.A 1.25 swings out filter, iris diaphragm. Hidg resolution digital camera eyepiece- high resolution 1282 x 1024 CCD digital camera. It adopt it high performance USB. The transmission speed is 30 f/s. Launderometer https://www.myqinstruments.com/launderometer.htm https://www.myqinstruments.com/launderometer.htm Fabric Testing Instruments Sat, 22 Jun 2019 00:00:00 +0530 SDCE Consumables https://www.myqinstruments.com/sdce-consumables.htm https://www.myqinstruments.com/sdce-consumables.htm Fri, 24 May 2019 00:00:00 +0530 PH Meter https://www.myqinstruments.com/ph-meter.htm https://www.myqinstruments.com/ph-meter.htm Sat, 22 Jun 2019 00:00:00 +0530 Water Bath Shaker https://www.myqinstruments.com/water-bath-shaker.htm https://www.myqinstruments.com/water-bath-shaker.htm Fri, 05 Jul 2019 00:00:00 +0530 Integrated micro-processing technology controlling mode, the water bath shaker is the combination of high precision controller. It has features as follows: small volume, light weight, low noises, no pollution, temperature digital control and display, high temperature control accuracy, and easy operation. It provides many functions like digital display for the shaking speed, wide range of shaking speed adjustable and multiple shaking brackets for choosing. Its perfect protection and self trouble-checking functions like low water level protection and temperature out of control protection make the operation safer and more reliable. It is extensively applied in various fields e.g industry, hospital, school and lab scientific research department, etc   Salient Features Versatile usage. Ergonomic Design Energy Efficient Long life Low Maintenance Guaranteed supply of Spares & Service for one years. Onsite installation & after sales service through company trained engineers.   Use An Ideal equipment suitable for mixing the samples by shaking with heating in research Institutes and Pharmaceutical Industries & Laboratories. Optional Spare holding rack S.S. to hold flask of 25ml/50ml/ 100ml/250ml/500ml/ T.T. Rack (any one size) RPM indicator digital Digital temperature controller calibration certificate issued by manufacturer. Digital temperature controller calibration certificate by test house traceable to NPL or NABL accredited Lab Sublimation Tester https://www.myqinstruments.com/sublimation-tester.htm https://www.myqinstruments.com/sublimation-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 The My Q SCORCH/SUBLIMATION TESTER – consisting of a pair of smooth and parallel steel  plates which are hinged to each other and the hinged have the provision to automatically parallel each plates and the  upper plate is equipped with an electrical heater  which is accurately control the temperature with the help of the digital temperature indicator cum controller (PID type) and giving a pressure on the specimen of 4 ± 1 kPa. Heat is transferred to the specimen from the upper side only. All the assembly fitted on the fabricated base plate. There is a control panel which is mounted the digital temperature indicator cum controller which is PID type, the digital temperature controller control the temperature of the upper plate of the instrument accurately. The second meter is digital timer with reset switch which can be used to check the process time. There is mains switch for power supply of the instrument. And the other switch for the supply of the heater.All the parts of the instrument are either powder coater or chrome platter for the corrosion resistance long life.Related StandardAATCC 92, AATCC 114, AATCC 117, AATCC 133, ISO 105-P01, ISO 105-X11  Conditioning Chambers https://www.myqinstruments.com/conditioning-chambers.htm https://www.myqinstruments.com/conditioning-chambers.htm Sat, 22 Jun 2019 00:00:00 +0530 Lab Shakers https://www.myqinstruments.com/lab-shakers.htm https://www.myqinstruments.com/lab-shakers.htm Fri, 05 Jul 2019 00:00:00 +0530 Beesley Balance https://www.myqinstruments.com/beesley-balance.htm https://www.myqinstruments.com/beesley-balance.htm Fri, 05 Jul 2019 00:00:00 +0530 Stretch & Recovery Tester https://www.myqinstruments.com/stretch-recovery-tester.htm https://www.myqinstruments.com/stretch-recovery-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Stretch & Recovery Wall Mount Model is used to determine the stretch & recovery of the Elastic fabric incase of both woven & knitted fabrics or Lycra Fabric. It gives the percentage of stretch.   It is equipped with two testing area. In left side there is upper fixed clamp and lower movable clamp with graduated scale, this area helps to determine the amount of growth and recovery of fabric under specified extension, In right side there is a upper fixed clamp and a lower dowel pin, this area helps to determine amount of stretch and growth, and recovery of fabric under specified extension.   Technical Specification (Portable Model) - A Portable Metal Frame With Stand & Wheels   Weights 1 Lbs – 2 no 2 lbs – 1 no 5 lbs – 1 no Optional extra weights available   Dimension Length - 1440MM Depth - 1580MM Height - 815MM   Technical Specification-(Wall Mount Model) Weights – 1 Lbs – 2 no 2 lbs – 1 no 5 lbs – 1 no Optional extra weights available.   Dimension Length - 1100MM Depth - 1270MM Height - 165.1MM   Note - Also Availabele in Portable Model Stiffness Tester https://www.myqinstruments.com/stiffness-tester.htm https://www.myqinstruments.com/stiffness-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Fabric Stiffness Tester, to determine the bending height, flexural rigidity and bending modulus of a fabric by simple procedures and calculation   Objectives : To measure the stiffness of the given fabric sample.   Specifications- Tilt angle: 41. 5 º Weight- 4 Kg   Dimensions Width: 350 mm (14 inch) Depth: 150 mm (6 inch) Height: 200 mm ( 8 inch)   Standards - ASTM D1388 BS 3356 DIN 53362 ERT 50-2   Apparatus: Stiffness Tester Scissor Scale   Sample : Cotton woven fabric Size: 6 X 1². Pilling Assessment Viewer https://www.myqinstruments.com/pilling-assessment-viewer.htm https://www.myqinstruments.com/pilling-assessment-viewer.htm Fri, 05 Jul 2019 00:00:00 +0530 THE PAV can be used for test methods including ASTM D3511 Arcadia AG26 ASTM D3512 Next TM26 ASTM D3514 SN 198525 ASTM D4970 Wool mark TM196   The pilling assessment viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 part and adopting the following test methods…… Part Bs En Iso12945-1 : Pilling Box Method Part Bs En Iso12945-2 : Modified Martindale Method Part Bs En Iso12945-3 : Random Tumble Pilling Method The versatile nature of the unit includes a recess for the modified Martindale specimen head. This enables the fabric to be assessed during the test procedure , whilst still mounted on the head. 10x Magnascope https://www.myqinstruments.com/10x-magnascope.htm https://www.myqinstruments.com/10x-magnascope.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q magna scope is useful to evaluate dyeing, printing ,weaving defects or constructional difference in any type of fabrics. Light source from top & bottom facilities in the assessment.   Magnification- 10 x Total weight 11 kg (approx) Textile Extensometer https://www.myqinstruments.com/textile-extensometer.htm https://www.myqinstruments.com/textile-extensometer.htm Fri, 05 Jul 2019 00:00:00 +0530 Carpet Flammability Tester https://www.myqinstruments.com/carpet-flammability-tester.htm https://www.myqinstruments.com/carpet-flammability-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 GSM Balance Machine https://www.myqinstruments.com/gsm-balance-machine.htm https://www.myqinstruments.com/gsm-balance-machine.htm Fri, 05 Jul 2019 00:00:00 +0530 Table Top Model Moisture Meter https://www.myqinstruments.com/table-top-model-moisture-meter.htm https://www.myqinstruments.com/table-top-model-moisture-meter.htm Fri, 05 Jul 2019 00:00:00 +0530 Heat Sealing Machine https://www.myqinstruments.com/heat-sealing-machine.htm https://www.myqinstruments.com/heat-sealing-machine.htm Fri, 05 Jul 2019 00:00:00 +0530 Digital Opsity Tester https://www.myqinstruments.com/digital-opsity-tester.htm https://www.myqinstruments.com/digital-opsity-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 Tensile Tester https://www.myqinstruments.com/tensile-tester.htm https://www.myqinstruments.com/tensile-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 B4 Viscosity Cup https://www.myqinstruments.com/b4-viscosity-cup.htm https://www.myqinstruments.com/b4-viscosity-cup.htm Fri, 05 Jul 2019 00:00:00 +0530 Paper Compressive Strength Tester https://www.myqinstruments.com/paper-compressive-strength-tester.htm https://www.myqinstruments.com/paper-compressive-strength-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 RCT Cutter https://www.myqinstruments.com/rct-cutter.htm https://www.myqinstruments.com/rct-cutter.htm Fri, 05 Jul 2019 00:00:00 +0530 Penetrometer Water Resistance Tester https://www.myqinstruments.com/penetrometer-water-resistance-tester.htm https://www.myqinstruments.com/penetrometer-water-resistance-tester.htm Tue, 23 Jul 2019 00:00:00 +0530 WATER RESISTANCE TESTER- PENETROMETER The uppers of shoes get folded over the toe portion every time a step is taken. These repeated folding cause the finished grains to start cracking, resulting in loss of water resistance to ensure that the leather uppers retain their water resistance for a reasonable period of use, the action of such folding on them is simulated by subjecting test specimens taken from the leather to a water penetration test using an electrometer. In this test, the test specimens are held in form of thoughts between two cylindrical grips one of the grips is then repeatedly moved towards and away from the other along their common axis, the test specimens are kept immersed in a water bath unto a part of their periphery. Penetration is detected when electric conductivity is established between the inside and outside surfaces of the test specimens. The time needed to cause penetration of water through the test specimens is determined and taken as an index of water-resistance of the leather. The test can be continued to determine the per cent gain of weight of the specimen due to water absorption and also to determine the mass of water that has transmitted over a known time interval.   Technical Data Dimensions of test specimens: 60mm x 70mm Number of test specimens tested at a time: 3-4 The diameter of cylindrical grip : 30mm Flexing frequency: 50 cycles per minute Travel of moving grip : 2.0, 3.0, 4.0, 6.0mm Motor: ¼ HP single phase 230 volts AC   RELEVANT SPECIFICATIONS IUP/10: Official Methods of International Union of Leather Chemists societies. IS 5914: 1970: Methods of Physical Testing of Leather LP 20: Dynamic Water Proof-ness Test for Upper Leather IS 15298 (Part 1): 2002: Water Penetration & Water Absorption tester ISO: 8782-1:1998 Shade Card Winding Machine https://www.myqinstruments.com/shade-card-winding-machine.htm https://www.myqinstruments.com/shade-card-winding-machine.htm Fri, 05 Jul 2019 00:00:00 +0530 My QShade Card-Winding Machine consists of a set of grips between which the card is held with the help of knurling bolts. There is an arrangement of gears to rotate both grips at a time. Yarn is wind over the shade card at equal spacing under a desired tension. The yarns are guided on the shade card with the help of yarn guides, which are moves parallel to the shade card with the help of the worm / worm wheel and cam/ follower mechanism. The guide is positively linked to the rotation of the shade card with the help of the worm/ worm wheel, shaft and cam/ follower mechanism. There are a set of spring loaded adjustable tensioning arrangement provide the desired tension to the yarn. For holding the reels, there is a stand on which the holding pins and guides for yarn etc. are mounted for easy movement of the yarns.   The equipment is built on the fabricated base. It is finished in metallic or deco painting and bright chrome/ zinc plating to give it a corrosion resistance finish. Analytical Weighing Balance 320gm https://www.myqinstruments.com/analytical-weighing-balance-320gm.htm https://www.myqinstruments.com/analytical-weighing-balance-320gm.htm Fri, 05 Jul 2019 00:00:00 +0530 Reliable analytical results begin with accurate weighing. Proper sample preparation and careful data handling are crucial.When there is no room for compromise, when you need great performance and durability, robust and easy - to - use analytical balances from My Q Instruments are the perfect choice.Our analytical balances have readabilities of 0.001 gm, and capacities 320 gm that cover all of your analytical workflows. GSM Balancing Machine https://www.myqinstruments.com/gsm-balancing-machine.htm https://www.myqinstruments.com/gsm-balancing-machine.htm Wed, 24 Jul 2019 00:00:00 +0530 We are one of the leading manufacturer of Digital GSM Scale. This machine used to determine accurate GSM of any Paper, Fabric, laminated film, Leather. This Digital GSM Scale has inbuilt battery backup of more than 24 Hrs, battery charger and acrylic wind sealed. This Digital GSM Scale can be operate and GSM Mode and Gram mode by using selectable key. Manual Padding Mangle https://www.myqinstruments.com/manual-padding-mangle.htm https://www.myqinstruments.com/manual-padding-mangle.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Laboratory Padding Mangle is a versatile laboratory machine with wide applications in Dyeing, Printing & Finishing processes. By simulating the production level process parameters on laboratory scale satisfactory results can be obtained with JK &PC. Padding Mangle. Two bowl Vertical Padding Mangle has bowls coated with synthetic rubber. In standard supply, shore hardness of the rubber is 70 shore hardness. Analytical Weighing Balance 220gm https://www.myqinstruments.com/analytical-weighing-balance-220gm.htm https://www.myqinstruments.com/analytical-weighing-balance-220gm.htm Fri, 05 Jul 2019 00:00:00 +0530 Reliable analytical results begin with accurate weighing. Proper sample preparation and careful data handling are crucial.When there is no room for compromise, when you need great performance and durability, robust and easy - to - use analytical balances from My Q Instruments are the perfect choice.Our analytical balances have readabilities of 0.001 gm, and capacities 220 gm that cover all of your analytical workflows. AATCC Viewing Boards https://www.myqinstruments.com/aatcc-viewing-boards.htm https://www.myqinstruments.com/aatcc-viewing-boards.htm Wed, 24 Jul 2019 00:00:00 +0530 This Evaluation Booard is Designed For evaluation of Smoothness in Appearance of Flat fabric and Seams and the Retention of Pressed Or crease in arments and other Texttile Products after Repeated Home Laundering. this is also Used to Evaluate the Wrinkling Recovery of The fabrics After Undertaking the Wrinkle Recovery test.Equipment Detailsthe Myq Viewing Board (aatcc)consists of a Wide Board At 85° with the Cool white fluorescent Lamp Fixed At Top. Aspear 500 watt Flood Lamp with Standardcondition, a Light Shield is also Provided to Minimize the Interference of Flood lamplight Directly Going to the Viewer eye. the Board is Duly Painted as Per grey Chip No.2 of Aatcc Staining Grey scale to Meet the Specification Of american Standards.Salient Features Specially Designed Evaluation Board is Used to Access The rating of Appearance After Repeated Home Laundering comparing with the Standard Replicas. And also to Evaluate Crease Comparing with the Standard replicas. Specially Designed with Wheel At Base to Move Anywhere. It Can also Be Used to Assess Durable Press Rating. with 500 Watt Cool White Food Lamp& Light Reflecting shield. Additional Attachment to Ascertain the Viewing Position. Dimensions &the Colour, Matching with the Grey Chip-2 Of colour Staining Grey Scale Strictly Adheres to The american Standards. Supplied with Three Sample /replica Holders & Magnets For fixing Sample On Sample Holder.   Test MethodAATCC- 88B/88C/124/128/143/178 Infrared Laboratory Dyeing System https://www.myqinstruments.com/infrared-laboratory-dyeing-system.htm https://www.myqinstruments.com/infrared-laboratory-dyeing-system.htm Fri, 05 Jul 2019 00:00:00 +0530 nfrared Lab Dyeing System is suitable for all fibers and substrates dyeing. The infrared dyeing system producesaccurate laboratory sample dyeing with level and reproducible results and accommodates up to 24 positions with a low liquor ratio for synthetic and natural fibers. This infrared dyeing system moves the beakers in a circularrotation with advanced infrared heating technology eliminating glycol contamination and cumbersome beakcleaning.For the accurate dying, after the temp. reached 80 degree, is required to add assistant into the beaker in a long period, most IR dyeing machine adding liquid by using injector, and it is too fast. While is different, by adding liquid into the auxiliary beaker on top of the cap, and the liquid is kept added to the main beaker very slowly through the tiny hole of cap. This device is to simulate the actual dying process, that the pump adding assistant slowly, this Chemical Adding kits is offered on request.FeaturesThree-dimensional turning, clockwise and anti-clockwise running makes level dyeing results.Beakers are made of quality SUS316 stainless steel, heating fast and level, specially pressure-tested beakers offer maximum safety for atmospheric and high-temperature dyeing.Infrared heating continuously (non-off-type) by high life infrared heaters which 360- degree ring-shape, direct heating of steel cup, to let dyeing equably and saving 50% electricity.Programmable computer system controls process, can save up to 99 kind of process, LCD displays temperature, time, process No. and temperature curve, imported high-precision PT-100 temperature probe monitoring the actual temperature of dyeing liquor directly, to let heating and cooling automatically.OptionsChemical adding system, specially designed chemical lid (dyepot cap) and chemadd pot (for chemical powder or solution additions) to add chemical without opening dyepot ensures temperature stability during the dyeing. Electric Padding Mangle https://www.myqinstruments.com/electric-padding-mangle.htm https://www.myqinstruments.com/electric-padding-mangle.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Laboratory Padding Mangle is a versatile laboratory machine with wide applications in Dyeing, Printing &  inishing processes. By simulating the production level process parameters on laboratory scale satisfactory results can be obtained with JK &PC. Padding Mangle. Two bowl Vertical Padding Mangle has bowls coated with synthetic rubber. In standard supply, shore hardness of the rubber is 70 shore hardness. Uniform pressure through out the bowl is achieved by pneumatic loading of the bowls. This ensures in achieving desired expression results. Safety devices provided include a fabric feeder, a safety rod & emergency stop button. Machine is provided with a liquor trough, nippadding trough, doctor blade &cleaning spray for cleaning of bowls & trough. Padding Mangle with 3 bowls can be offered if needed with central bowl of ebonite, stainless steel or synthetic rubber. For specific purpose, bowls canbe offered with highershore hardness. Impact Tester Notch Cutter https://www.myqinstruments.com/impact-tester-notch-cutter.htm https://www.myqinstruments.com/impact-tester-notch-cutter.htm Fri, 05 Jul 2019 00:00:00 +0530 MYQ Notch Cutter for Impact testing is designed to perform a very little stress concentration of notch in the testsamples to make sure that breaking of the sample takes place at the same position each time a test is initiated. Thetesting instrument is specially meant for the use in plastic industry to test plastic polymer materials. The machine iscapable of producing notch profiles to all international test standards like ASTM D256 – 10, ISO 180. It is a samplepreparation machine that prepares the sample for Izod Tester to test the plastic sheets. The instrument is used tomake the notch of the plastic sheets up to 5 mm.Technical The testing instrument is equipped with depth micrometer. The range of the machine is 0 to 25mm with the minimum count of 0.01mm. The notch cutter cuts the sample from an angle of 45º. The power requirement for the laboratory equipment is single phase, 230 Volts, 50 Hz. Veslic Rubbing Fastness Tester https://www.myqinstruments.com/veslic-rubbing-fastness-tester.htm https://www.myqinstruments.com/veslic-rubbing-fastness-tester.htm Fri, 05 Jul 2019 00:00:00 +0530 My Q Veslic rubbing fastness tester is designed for determining the color fastness of leather, plastics and textilematerials.The colorfastness is assessed by checking change in color of the specimen and stain of the felt after rubbingthe specimen. Both dry and wet tests can be made by this machine.My Q Veslic rubbing fastness tester consists of a rigid flat metallic platform on which the test specimen can be heldfirmly and a rubbing finger that rubs against it under a specified load. The platform is fixed over the base of theequipment and lies in a horizontal plane. The test specimen is held firmly over the platformwith the help of two clamps holding it at both ends.The specimen-mounting platform is in two parts. The fixed part of the platform is held firmly on the base of the tester,while the movable part can be moved away from the fixed part after the test specimen is mounted over theplatform to subject it to an initial extension.The abrading finger has a flat square shaped cavity in it, in which a square shaped felt piece can be held during thetest. The felt piece picks up color lost by the specimen during rubbing motion to the finger is given throughareciprocating arm, which runs on two ball-bearings to minimize friction and to apply a uniform load on the finger.The arm is moved by a motor- operated crank and connecting link. A pre-set counter records the number of abradingcycles, as well as switches off the motor after a desired number of rubs. You can evaluate the result by help of Grey Scales.   Releted Stsndard SATRA PM 173-1995 , DIN EN ISO 11640-1998, ISO 11640-1993, IULTCS/IUS 450-1993, DIN EN ISO 17700-2005, ISO20344-2994, CLAUSE 7.3 Hand Operated Crockmeter https://www.myqinstruments.com/hand-operated-crockmeter.htm https://www.myqinstruments.com/hand-operated-crockmeter.htm Wed, 24 Jul 2019 00:00:00 +0530 MYQ Colour fastness to rubbing is the most basic of colour fastness tests, Crockmeter is used to determine colour fastness to wet and dry rubbing. Specimens are rubbed with dry, standard cotton cloth (Crocking cloth) and again, if applicable, with wet cloth. The staining of the crocking cloth is assessed with an AATCC or SDC Grey Scale.   Equipment Hand Opreted crock meter is used for determination of color fastness of dyed & printed textile to dry & wet rubbing. This equipment is designed with 16mm diameter finger & length of traverse 100(±5)mm. The display comes digitally on the panel. The test specimen is held firmly over standard abrasive paper (Emery paper) with the help of specimen holder. The equipment is built on a mild steel base to give the stability and rigidity.   Salient Features Diameter of the rubbing finger :16mm Load on the finger : 9 N Specially designed acrylic clamp to mount the test garments. Supplied with all accessories. Length of the traverse of the finger: 104± 3mm   Accessories : Main Unit : 01 No. Finger (f16mm fitted in the unit) : 01 No. Spring Clips (for finger f16 mm) : 02 Nos. Specimen Holder (Acrylic) : 01 No. The User manual : 01 No.   Related Standards - ISO 105 x 12/D02 , AATCC 8 / 166, BS 1006 D02 MBTL Light Fastness Tester https://www.myqinstruments.com/mbtl-light-fastness-tester.htm https://www.myqinstruments.com/mbtl-light-fastness-tester.htm Wed, 24 Jul 2019 00:00:00 +0530 We are a counted name in manufacturing and supplying MBTL Light Fastness Tester. All these testers are manufactured under the supervision of our professionals who ensure flawlessness of the offered range. Engineered with precision, these products are fabricated using superior quality raw material with the aid of modern tools and technology. Patrons can avail these in various sizes, grades and dimensions.   Features: Low maintenance Robust construction Smooth finish Easy operations Prices of Grey scale & blue wool standards will be charged extra IS0 blue wool light fastness standard 1 to 8 set Perspirometers https://www.myqinstruments.com/perspirometers.htm https://www.myqinstruments.com/perspirometers.htm Wed, 24 Jul 2019 00:00:00 +0530 AATCC Perspirometer https://www.myqinstruments.com/aatcc-perspirometer.htm https://www.myqinstruments.com/aatcc-perspirometer.htm Wed, 24 Jul 2019 00:00:00 +0530 My Q AATCC Perspirometer Helpful for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration. Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undid adjacent fabrics on both sides. The test specimen along with adjacent fabric is placed between plastic (Acrylic) Separator plates, under a fixed load, inside an Incubator maintained at 37 C.   Accessories Main unit : 1 No. Calibrated Load (SS 316) : 1 No. Number of Separator Plates : 21 Nos.   Features of Perspirometer: Can also be used for testing color fastness against sea water and water. Made of stainless steel frame. Made of stainless steel frame. User friendly and corrosion resistant. Smooth precision engineered components for excellent performance ISO Perspirometer https://www.myqinstruments.com/iso-perspirometer.htm https://www.myqinstruments.com/iso-perspirometer.htm Wed, 24 Jul 2019 00:00:00 +0530 My QISO Perspirometer Helpful for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration. Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undid adjacent fabrics on both sides. The test specimen along with adjacent fabric is placed between plastic (Acrylic) Separator plates, under a fixed load, inside an Incubator maintained at 37 C.   Accessories Main unit : 1 No. Calibrated Load (SS 316) : 1 No. Number of Separator Plates : 21 Nos. Features of Perspirometer: Can also be used for testing color fastness against sea water and water. Made of stainless steel frame. User friendly and corrosion resistant. Smooth precision engineered components for excellent performance. ISO+AATCC Perspirometer https://www.myqinstruments.com/iso-aatcc-perspirometer.htm https://www.myqinstruments.com/iso-aatcc-perspirometer.htm Wed, 24 Jul 2019 00:00:00 +0530 My Q Perspirometer Helpful for determining the resistance of the color of Textiles of all kinds and in all forms to the action of Human perspiration. Color Fastness of Dyed or printed fabrics, against perspiration, is determined by exposing the fabric sample to the action of both alkaline and acidic reagents, while in contact with undid adjacent fabrics on both sides. The test specimen along with adjacent fabric is placed between plastic (Acrylic) Separator plates, under a fixed load, inside an Incubator maintained at 37 C.Accessories Main unit : 1 No. Calibrated Load (SS 316) : 1 No. Number of Separator Plates : 21 Nos. Features of Perspirometer: Can also be used for testing color fastness against sea water and water. Made of stainless steel frame. Made of stainless steel frame. User friendly and corrosion resistant. Smooth precision engineered components for excellent performance.